iCerMax™ offers a broad range of primary, secondary and final filtration systems for bulk tanks as well as on board units, utilising the benefit of proprietary filtration technologies.

Developed in Africa, the products offered by iCerMax™ extend the economic lifecycle of engines and equipment with respect to the often harsh contamination levels facing the continent’s fuel sector.

iCerMax™ has a full range of diesel products to address all the following filtration market needs (at any flow rates, with the required cleanliness levels to ISO standards, and the sustainable removal of free and suspended water).

  • Dispensing & receiving from fuel tanks
  • On-board equipment: bakkies, tractors, harvesters, trucks & generators
  • Tank transfers
  • Tank cleaning
  • Kidney filtration
  • Mobile trailers/fuel bowsers, tankers etc.
Bulk Filtration Header Image 1
Bulk Filtration Header Image 3

Mobile Bowser Filtration


Spin On Head Options:

Standard Spin On Head
Standard Spin On Head
  • Standard head is supplied with all spin on vessels unless another head is specified when placing order
  • Standard head fits all 1 ¾ -12 UN heads - fits onto most spin on systems found in the market place
  • Need to spin off complete vessel & head in order to change out cartridge. Needs full length of vessel with head underneath
ICE 1” Head
ICE 1” Head
  • The ICE 1” head has an additional price surcharge & customers need to specify ICE 1” head when placing order
  • It does not require any additional fittings & has a 1” inlet and outlet port, can be mounted inline (steel piping) or to a flat bracket / plate using the four M10 threaded holes in the top of the head
  • Note that when using the ICE 1” head, you will need additional space under the vessel (double the vessel) in order to do cartridge change outs
Yellow 1” Head
Yellow 1” Head
  • The yellow 1” head has an additional price surcharge & customers need to specify Yellow 1” Head when placing order
  • It has a 1” inlet and outlet port & can be mounted inline (steel piping) or to a flat bracket / plate using the four M10 threaded holes in the top of the head
  • When using this head you will need maximum 5 cm of space under the vessel in order to undertake cartridge change outs
  • Note that top half of yellow head (1” ports) stays secured to steel piping or flat mounting surface & bottom half of yellow head turns off in order to do cartridge change outs

iDieselMax™ - XLW Water Unit with Yellow 1” Head
iDieselMax™ - XLW Water Unit with Yellow 1” Head

iDieselMax™ - XLW Water Unit with Yellow 1” Head

Technical Data: Standard XL Water Unit with Spin On Head

Description: iCerMax™ Reusable Spin-On Housing with Yellow 1” Spin On Head

  • Can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts on to a flat plate
  • Only replace inner cartridge, not the entire spin on filter
  • Water cartridge comprises a stainless steel mesh & 10 micron pleated paper (standard fitment)
  • Stainless steel mesh is self-cleaning & a permanent water coalesce for free and suspended water
  • Pleated paper has multi pleats which ensure a higher efficiency with an extremely large dirt holding capacity - 47% more filtration medium
Part No: Housing with sight glass ICEXLW/HOUSING
Part No: Water particle cartridge ICEXLW/CARTRIDGE
Micron Rating: Commercial
Target Cleanliness: Removes free & suspended water
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports (1” NPT): 25 mm
Housing Length: 475 mm (including head)
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Water cartridge removes both free & suspended water
  • Water cartridge has a stainless steel mesh medium which is self-cleaning & not affected by water, thus maintaining coalescing
  • Suspended water is crucial to remove, as Tier 4 & Euro 5 advanced injector systems fail on the smallest amounts of water in suspension
  • Allows visual physical inspection of filtration medium’s integrity, see colour/quality of fuel from supplier, allowing inspection for any traces of algae or bacteria from bulk tank
  • Sight glass option to verify physical fuel colour & identity water
Water Cartridge: Stainless steel mesh with 10 micron pleated paper

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XLW Water Unit with ICE 1” Head
iDieselMax™ - XLW Water Unit with ICE 1” Head

iDieselMax™ - XLW Water Unit with ICE 1” Head

Technical Data: Standard XL Water Unit with Spin On Head

Description: iCerMax™ Reusable Spin-On Housing with ICE 1” Head

  • Can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts on to a flat plate
  • Only replace inner cartridge, not the entire spin on filter
  • Water cartridge comprises a stainless steel mesh & 10 micron pleated paper (standard fitment)
  • Stainless steel mesh is self-cleaning & a permanent water coalesce for free and suspended water
  • Pleated paper has multi pleats which ensure a higher efficiency with an extremely large dirt holding capacity - 47% more filtration medium
Part No: Housing with sight glass ICEXLW/HOUSING
Part No: Water particle cartridge ICEXLW/CARTRIDGE
Micron Rating: Commercial
Target Cleanliness: Removes free & suspended water
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports (1” NPT): 25 mm
Housing Length: 475 mm (including head)
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Water cartridge removes both free & suspended water
  • Water cartridge has a stainless steel mesh medium which is self-cleaning & not affected by water, thus maintaining coalescing
  • Suspended water is crucial to remove, as Tier 4 & Euro 5 advanced injector systems fail on the smallest amounts of water in suspension
  • Allows visual physical inspection of filtration medium’s integrity, see colour/quality of fuel from supplier, allowing inspection for any traces of algae or bacteria from bulk tank
  • Sight glass option to verify physical fuel colour & identity water
Water Cartridge: Stainless steel mesh with 10 micron pleated paper

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XLS Strainer + ICE 1” Head
iDieselMax™ - XLS Strainer + ICE 1” Head

iDieselMax™ - XLS Strainer + ICE 1” Head

Technical Data: Standard XLS Water Unit with Strainer

Description: iCerMax™ Reusable Spin On Housing with ICE 1” Head

  • Head can be mounted inline (galvanised steel piping by using the four M10 threaded holes in the top of the head - mounts onto flat plate
  • Only replace inner filtration cartridge, not the entire spin on filter
  • Strainer is a 150 micron pleated mesh
  • Strainer is used to capture all the large particles going through the system & to protect pumps and expensive machinery down the line
  • Strainer has multi pleats which ensure a higher efficiency with an extremely large dirt holding capacity
Part No: Housing with sight glass ICEXLS/HOUSING
Part No: 150 micron strainer: ICEXLS/150STRAINER
Micron Rating: Commercial
Target Cleanliness: Removes large particles
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports (1” NPT): 25 mm
Housing Length: 445 mm (including head)
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Strainer prevents large objects from going through the system & damaging pumps or expensive equipment
  • Allows visual physical inspection of filtration medium’s integrity, see colour / quality of fuel from supplier, allowing inspection for any traces of algae or bacteria from bulk tank by using sight glass on side of vessel
  • Strainer: 150 micron stainless steel pleated mesh
  • Need full length of vessel underneath vessel when changing out cartridge

Ideal Applications:

  • Protect pumps & expensive equipment
  • Pre-filtration for fungal and algae in stationary bulk tanks

iDieselMax™ - XLW Water Filter with Spin On Head
iDieselMax™ - XLW Water Filter with Spin On Head

iDieselMax™ - XLW Water Filter with Spin On Head

Technical Data: Standard XL Water Unit with Spin On Head

Description: iCerMax™ Reusable Spin-On Housing

  • Fits all 1 ¾-12 UN heads (single, dual & manifolds)
  • Only replace inner cartridge, not the entire spin-on filter
  • Water cartridge comprises a stainless steel mesh & 10 micron pleated paper (standard fitment)
  • Stainless steel mesh is self-cleaning & a permanent water coalesce for free and suspended water
  • Pleated paper has multi pleats which ensure a higher efficiency with an extremely large dirt holding capacity - 47% more filtration medium
Part No: Housing with sight glass ICEXLW/HOUSING
Part No: Water particle cartridge ICEXLW/CARTRIDGE
Micron Rating: Commercial
Target Cleanliness: Removes free & suspended water
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports (1” NPT): 25 mm
Housing Length: 435 mm (including head)
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Water cartridge removes both free & suspended water
  • Water cartridge has a stainless steel mesh medium which is self-cleaning and not affected by water, thus maintaining coalescing
  • Suspended water is crucial to remove, as Tier 4 & Euro 5 advanced injector systems fail on the smallest amounts of water in suspension
  • Allows visual physical inspection of filtration medium’s integrity, see colour/quality of fuel from supplier, allowing inspection for any traces of algae or bacteria from bulk tank
  • Sight glass option to verify physical fuel colour & identity water
Water Cartridge: Stainless steel mesh with 10 micron pleated paper

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


XXXLW - Water Filter with Yellow 1” Head
XXXLW - Water Filter with Yellow 1” Head

iDieselMax™ - XXXLW - Water Filter with Yellow 1” Head

Technical Data: Extra Long Water Removal Filter

Description:

Note: XXXL is double the length of the standard XL filter

  • XXXL has reusable spin-on housing with yellow 1” heads. Yellow head can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts on to flat surface
  • Flow indicator arrows stamped on top of head - need 40 mm of space below vessel for cartridge change out
  • Water removal cartridge consists of a stainless steel mesh & 10 micron pleated paper (standard fitment)
  • Stainless steel mesh is self-cleaning and is a permanent water coalesce for free & suspended water
  • Pleated paper has multi-pleats which ensure a higher efficiency & an extremely large dirt holding capacity

Part No:-

  • Housing: ICEXXXLW/HOUSING
  • Water Particle Cartridge: ICEXXXLW/CARTRIDGE
Micron Rating: Commercial
Target Cleanliness: Removes free & suspended water
Housing Length: 760 mm
Housing Outer Diameter: 130 mm
Target Cartridge Length: 705 mm
Diesel Volume: 8.5 litres

Added Benefits:

  • Water cartridge removes both free & suspended water
  • Water cartridge has a stainless steel mesh medium which is self-cleaning & not affected by water, thus maintaining coalescing
  • Suspended water is crucial to remove, as Tier 4 and Euro 5 advanced injector systems fail on the smallest amounts of water in suspension
  • Allows visual physical inspection of filtration medium’s integrity, see colour & quality of fuel from supplier, allowing inspection for any traces of algae or bacteria from bulk tank
  • Sight glass option to verify physical fuel colour and identity water
Water Cartridge: Stainless steel mesh with 10 micron pleated paper

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XLP Particle Unit with Yellow 1” Head
iDieselMax™ - XLP Particle Unit with Yellow 1” Head

iDieselMax™ - XLP Particle Unit with Yellow 1” Head

Technical Data: Standard Particle Unit with Yellow 1” Head

Description: iCerMax™ Reusable Spin-On Housing with Yellow 1” Head

  • Yellow head can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts onto flat plate
  • Flow arrow indicator arrows stamped on top of head
  • Only replace inner filtration cartridge, not the entire spin-on filter
  • Yellow head allows easy, quick cartridge change outs - requires 40 mm of space under housing for cartridge change out - spin off/on
  • Cartridge has 47% more filtration medium, higher efficiency & dirt holding capacity compared to other spin on filters
Part No: Housing ICEXLP/HOUSING
Part No: Dirt particle cartridge: ICEXLP/CARTRIDGE
Micron Rating: Commercial
Target ISO Cleanliness: ISO 14/13/11
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports: 25 mm
Housing Length: 475 mm
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Lower material dispensing costs of used cartridge - only 0.92 kg compared to 2.55 kg toxic hazard disposal rates saving of 1.43 kg - also crush & incinerate cartridge
  • Environmentally friendly, less toxic waste, lower shipping costs
  • Allows physical inspection of filtration media on change outs

Particle Cartridge:

Utilises 4 micron multi-layered fully synthetic filtration medium.
NOTE: Only requires 40 mm space under vessel for cartridge change outs

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XLP Particle Unit with ICE 1” Head
iDieselMax™ - XLP Particle Unit with ICE 1” Head

iDieselMax™ - XLP Particle Unit with ICE 1” Head

Technical Data: Standard Particle Unit with Spin On Head

Description: iCerMax™ Reusable Spin-On Housing with ICE 1” Head

  • Head can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts onto flat plate
  • Only replace inner filtration cartridge, not the entire spin-on filter
  • Dirt particle cartridge comprises 3 micron multi-layered fully synthetic medium
  • Cartridge has 47% more filtration medium, higher efficiency & dirt holding capacity compared to other spin on filters
Part No: Housing ICEXLP/HOUSING
Part No: Dirt particle cartridge: ICEXLP/CARTRIDGE
Micron Rating: Commercial
Target ISO Cleanliness: ISO 14/13/11
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports: 25 mm
Housing Length including head 445 mm
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Lower material dispensing costs of used cartridge - only 0.92 kg compared to 2.55 kg toxic hazard disposal rates saving of 1.43 kg - also crush & incinerate cartridge
  • Environmentally friendly, less toxic waste, lower shipping costs
  • Allows physical inspection of filtration media on change outs

Particle Cartridge:

  • Utilises one multi-layered fully synthetic medium
  • Needs full length of vessel underneath vessel when changing cartridge

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XLP Particle Unit with Spin On Head
iDieselMax™ - XLP Particle Unit with Spin On Head

iDieselMax™ - XLP Particle Unit with Spin On Head

Technical Data: Standard Particle Unit with Spin On Head

Description: iCerMax™ Reusable Spin-On Housing

  • Fits all 1 ¾-12 UN heads (single, dual and manifolds)
  • Only replace inner filtration cartridge, not the entire spin-on filter
  • Dirt particle cartridge comprises 4 micron multi-layered fully synthetic medium
  • Cartridge has 40% more filtration medium, higher efficiency & dirt holding capacity
Part No: Housing ICEXLP/HOUSING
Part No: Dirt particle cartridge: ICEXLP/CARTRIDGE
Micron Rating: Commercial
Target ISO Cleanliness: ISO 14/13/11
Flow Rate: Maximum 120 litres/min
Inlet / Outlet Ports: 25 mm
Housing Length: 435 mm (including head)
Housing Outer Diameter: 130 mm
Cartridge Length: 380 mm
Diesel Volume: 4.5 litres

Added Benefits:

  • Lower material dispensing costs of used cartridge - only 0.92 kg compared to 2.55 kg toxic hazard disposal rates saving of 1.43 kg - also crush and incinerate cartridge
  • Environmentally friendly, less toxic waste, lower shipping costs
  • Allows physical inspection of filtration media on change outs

Particle Cartridge:

Utilises one 4 micron multi-layered fully synthetic medium

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XXXLP - Particle Filter with Yellow 1” Head
iDieselMax™ - XXXLP - Particle Filter with Yellow 1” Head

iDieselMax™ - XXXLP - Particle Filter with Yellow 1” Head

Technical Data: Extra Long Particle Removal Filter

Description: iCerMax™ Reusable Spin-On Housing with Yellow 1” Head

  • Yellow head can be mounted inline (galvanised steel piping) or by using the four M10 holes in the top of the head - mounts on to flat surface
  • Flow indicator arrows stamped on top of head
  • Only replace inner filtration cartridge, not the entire spin-on filter
  • Dirt particle cartridge consists of 4 micron multi-layered fully synthetic medium
  • Cartridge has 200% more surface area - 3:1
  • Higher efficiency & higher dirt holding capacity
  • Extended service life due to larger surface area
Part No: Housing ICEXXXLP/HOUSING
Part No: Dirt Particle Cartridge ICEXXXLP/CARTRIDGE
Micron Rating: 4 microns
Target ISO Cleanliness: ISO 14/13/11
Housing Length: 760 mm
Housing Outer Diameter: 130 mm
Cartridge Length: 705 mm
Diesel Volume: 8.5 litres

Added Benefits:

  • Lower material dispensing costs of used cartridge
  • Toxic hazard disposal rates savings
  • Can crush and incinerate cartridge
  • Environmentally friendly, less toxic waste
  • Less shipping costs
  • Allows physical inspection of filtration media on change outs

Particle Cartridge:

Utilises one multi-layered fully synthetic medium

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets, self-bunded tanks & tank cleaning


iDieselMax™ - XL Combo + ICE 1” Head
iDieselMax™ - XL Combo + ICE 1” Head
iDieselMax™ - XL Combo + ICE 1” Head

iDieselMax™ - XL Combo + ICE 1” Head

Technical Data: Standard Particle Unit

1st phase is water filtration - free & suspended water = sustainability
2nd phase is particle filtration - 10 micron cellulose paper
3rd phase is particle filtration - 4 micron multi-layered synthetic medium

XL combo consists of two spin-on vessels, a XL water/particle vessel with sight glass (water detection/diesel quality inspection) & a XL particle vessel with a pressure gauge & two ball valves (inlet/outlet) mounted on a skid.

  • Both XL vessels are fitted with the ICE 1” heads. Both inlet & outlet ports of the ICE head are 1”
  • Note that both XL cartridges are replaceable. Spin-on housings are a once-off purchase as they are reusable
  • Skid is powder-coated & has 4 securing lugs which can be used when transporting or to secure on site
  • Cartridge has 47% more filtration medium, higher efficiency & dirt holding capacity than market
Part No: XL COMBO - ICE 1” HEAD
Micron Rating: Pre-filtration - 10 micron
Final filtration - 4 micron
Flow Rate: Recommended flow rate with 1” pipe - 120 litres per min
Target ISO Cleanliness: ISO 14/13/11
Combo Skid Length: 600 mm
Combo Skid Width: 450 mm
Combo Height: 960 mm
Diesel Volume: 9 litres (both vessels)

Part Numbers for Cartridges:-

Water/Particle Cartridge: ICEXLW/CARTRIDGE
Water/particle cartridge consists of resin-coated stainless steel mesh & 10 micron pleated paper - removes free and suspended water

Particle Cartridge:ICEXLP/CARTRIDGE
Particle cartridge consists of 4 micron multi-layered fully synthetic medium - removes particles from diesel

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets & self-bunded tanks


iDieselMax™ - XXXL Combo + ICE 1” Head
iDieselMax™ - XXXL Combo + ICE 1” Head
iDieselMax™ - XXXL Combo + ICE 1” Head

iDieselMax™ - XXXL Combo + ICE 1” Head

Technical Data: Standard Unit

Description: iCerMax™ XXXL Combo System is a 3-phase filtration system

1st phase is water filtration - free & suspended water = sustainability
2nd phase is particle filtration - 10 micron cellulose paper
3rd phase is particle filtration - 4 micron multi-layered synthetic medium

XXXL combo consists of two spin on vessels, a XXXL water/particle vessel with sight glass (water detection/diesel quality inspection) & a XXXL particle vessel with a pressure gauge & two ball valves (inlet/outlet) mounted on a skid.

  • Both XXXL vessels are fitted with the ICE 1” heads
  • Both inlet and outlet ports of the ICE head are 1”
  • Note that both XXXL cartridges are replaceable - spin on housings are a once-off purchase as they are reusable
  • Skid is powder-coated & has 4 securing lugs which can be used when transporting, or to secure on site
  • Cartridge has 176% more filtration medium, higher efficiency & dirt holding capacity than market
Part No: XXXL COMBO - ICE 1” HEAD
Micron Rating: Pre-filtration - 10 micron
Final filtration - 4 micron
Flow Rate: Recommended flow rate with 1” pipe - 120 litres per min
Target ISO Cleanliness: ISO 14/13/11
Combo Skid Length: 700 mm
Combo Skid Width: 600 mm
Combo Height: 1 350 mm
Diesel Volume: 17 litres (both vessels)

Part Numbers for Cartridges:-

Water/Particle Cartridge No: ICEXXXLW/CARTRIDGE
Water/particle cartridge consists of resin-coated stainless steel mesh & 10 micron pleated paper, removes free and suspended water

Particle Cartridge No: ICEXXXLP/CARTRIDGE
Particle cartridge consists of 4 micron multi-layered fully synthetic medium, removes particles from diesel

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets & self-bunded tanks


iDieselMax™ - XXL Combo + ICE 1” Yellow Heads
iDieselMax™ - XXL Combo + ICE 1” Yellow Heads

iDieselMax™ - XXL Combo + ICE 1” Yellow Heads

Technical Data: Standard Particle Unit

Description: iCerMax™ XXL Combo System is a 3-phase filtration system

1st phase is water filtration - free and suspended water = sustainability
2nd phase is particle filtration - 10 micron cellulose paper
3rd phase is particle filtration - 4 micron multi-layered synthetic medium

  • XXL Combo consists of two spin-on vessels, a XXL water/particle vessel with sight glass (water detection/diesel quality inspection) & a XXL particle vessel with a pressure gauge & two ball valves (inlet/outlet) mounted on a skid.
  • Both XXL vessels are fitted with the ICE 1” yellow heads
  • Both inlet and outlet ports of the ICE head are 1”
  • Both XXL cartridges are replaceable
  • Spin-on housings are a once-off purchase as they are reusable
  • Skid is powder-coated & has 4 securing lugs which can be used when transporting or to secure on site
  • Cartridge has 98% more filtration medium, higher efficiency and dirt holding capacity than market
Part No: XXL COMBO - ICE 1” YELLOW HEAD
Micron Rating: Pre-filtration - 10 micron
Final filtration - 4 micron
Flow Rate: Recommended flow rate with 1” pipe - 120 litres per min
Target ISO Cleanliness: ISO 14/13/11
Combo Skid Length: 630 mm
Combo Skid Width: 500 mm
Combo Height: 980 mm
Diesel Volume: 12 litres (both vessels)

Part Numbers for Cartridges:-

Water/Particle Cartridge: ICEXXLW/CARTRIDGE
Water/particle cartridge consists of resin-coated stainless steel mesh & 10 micron pleated paper - removes free & suspended water

Particle Cartridge: ICEXXLP/CARTRIDGE
Particle cartridge consists of 4 micron multi-layered fully synthetic medium - removes particles from diesel

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service truck & mobile bowsers, gensets & self-bunded tanks


iDieselMax™ - XXXL Combo + ICE 1” Yellow Heads
iDieselMax™ - XXXL Combo + ICE 1” Yellow Heads

iDieselMax™ - XXXL Combo + ICE 1” Yellow Heads

Technical Data: Standard Unit

Description: iCerMax™ XXXL Combo System is a 3-phase filtration system

1st phase is water filtration - free & suspended water = sustainability
2nd phase is particle filtration - 10 micron cellulose paper
3rd phase is particle filtration - 4 micron multi-layered synthetic medium

XXXL combo consists of two spin on vessels, a XXXL water/particle vessel with sight glass (water detection/diesel quality inspection) & a XXXL particle vessel with a pressure gauge & two ball valves (inlet/outlet) mounted on a skid.

  • Both XXXL vessels are secured using the ICE 1” yellow heads
  • Both inlet and outlet ports of the ICE head are 1”
  • Note that both XXXL cartridges are replaceable. Spin on housings are a once-off purchase as they are reusable
  • Skid is powder-coated and has 4 securing lugs which can be used when transporting, or to secure on site
  • Cartridge has 176% more filtration medium, higher efficiency & dirt holding capacity than market
Part No: XXXL COMBO - ICE 1” YELLOW HEAD
Micron Rating: Pre-filtration - 10 micron
Final filtration - 4 micron
Flow Rate: Recommended flow rate with 1” pipe - 120 litres per min
Target ISO Cleanliness: ISO 14/13/11
Combo Skid Length: 700 mm
Combo Skid Width: 600 mm
Combo Height: 1 350 mm
Diesel Volume: 17 litres (both vessels)

Part Numbers for Cartridges:-

Water/Particle Cartridge No: ICEXXXLW/CARTRIDGE
Water/particle cartridge consists of resin-coated stainless steel mesh & 10 micron pleated paper, removes free and suspended water

Particle Cartridge No: ICEXXXLP/CARTRIDGE
Particle cartridge consists of 4 micron multi-layered fully synthetic medium, removes particles from diesel

Ideal Applications:

Bulk tank filtration, kerbside pumps, tanktainers, service trucks & mobile bowsers, gensets & self-bunded tanks


iDieselMax™ - XL Combo Portable Diesel Transfer Skid (12V or 220V)
iDieselMax™ - XL Combo Portable Diesel Transfer Skid (12V or 220V)
iDieselMax™ - XL Combo Portable Diesel Transfer Skid (12V or 220V)

iDieselMax™ - XL Combo Portable Diesel Transfer Skid (12V or 220V)

Technical Data: Standard Particle Unit

Description: Portable Diesel Transfer Skid

Offers 3-phase filtration whilst delivering ISO cleanliness levels:
1st Stainless steel mesh removes both free & suspended water
2nd 10 micron pleated paper removes the particles, pre-filtration
3rd 4 micron synthetic medium removes particles, final filtration

  • XL combo filtration system consists of a XL spin-on water vessel & a XL spin-on particle cartridge with a pressure gauge mounted in between vessels. The XL water vessel has a sight glass for diesel inspection & has a cartridge that removes water (free & suspended) plus particles
  • The XL particle cartridge removes fine particles
  • Ideal for fuel transfers from drums, static bowsers or mobile bowsers, day tanks, kidney filtration etc.
  • Ideal for fuelling into vehicles, gensets, boats & equipment
  • Ideal for tank cleaning, static or mobile equipment tanks

Complete kit comprises:

  • XL water & particle vessels
  • Pressure gauge
  • OGM 25 flow meter
  • ¾” dispensing hose & nozzle - three metre length
  • Suction hose with strainer - three metre length

Optional: Timer control box

Part No: XL-12 VTRANSKIT
XL-220VTRANSKIT
Micron Rating: 4 micron
Flow Rate: 12 Volt Puisi Bi-Pump (70 litres per min)
220 Volt Puisi 56 Pump (56 litres per min)
Target ISO Cleanliness: ISO 14/13/11
Combo Skid Length (incl. hoses): 1 000 mm
Combo Skid Width (incl. hoses): 400 mm
Combo Height (incl. hoses): 650 mm
Diesel Volume: 9.0 litres

Part Numbers for Cartridges:-

  • XLW Water Cartridge: ICEXLW/CARTRIDGE
  • XLP Particle Cartridge: ICEXLP/CARTRIDGE

1” Inline Filter with Water Indicator Cartridge
1” Inline Filter with Water Indicator Cartridge

1” Inline Filter with Water Indicator Cartridge

Technical Data: Standard Unit

Description: iCerMax™ 1” Inline Filter with a 2-phase cartridge (water removal and particle removal)

  • Cartridge is extremely effective at removing free & suspended water
  • Filter head has no restrictions with regards to fuel flow - 1”
  • Filter has a clear plastic bowl for easy diesel inspection & a drain trap to remove any water or large dirt particles
  • Red ring floats on water - excellent indicator
Part No: 1”FIL-PART/WAT
Micron Rating: 10 micron
Diesel Volume: 1.1 litres
Mass Empty: 1.4 kg
Length: 300 mm
Width of Head: 130 mm x 110mm
Inlet Outlet Port Size: 25 mm

Element:

Utilises one cartridge consisting of a resin-coated stainless steel mesh & a 10 micron pleated paper

Element Part No: 1” CART-PART/WAT

Applications:

Mobile trailers, farmers’ gravity tanks, filling of gensec tanks on receiving, inline strainer - pump protection & kerbside pumps


1” Inline Filter with Mesh Strainer Cartridge
1” Inline Filter with Mesh Strainer Cartridge

1” Inline Filter with Mesh Strainer Cartridge

Technical Data: Standard Unit

Description: iCerMax™ 1” Inline Filter with a pleated 100 micron stainless steel mesh strainer for the removal of large dirt particles

  • Filter head has no restrictions with regards to fuel flow - 1” inlet/outlet ports
  • Filter has a clear plastic bowl for easy diesel inspection with a drain tap to remove any water or dirt particles
  • Red ring floats on water
  • Ideal for installing before pump - protects pump
Part No: 1” FIL-STR150
Micron Rating: 50 micron
Can customise micron rating
Diesel Volume: 1.1 litres
Mass Empty: 1.4 kg
Burst Pressure: 3.5 bar
Length: 300 cm
Width of Head: 130 mm x 110 mm
Inlet/Outlet Port Size: 25 mm

Element:

Utilises one 100 micron pleated stainless steel mesh strainer

Element Part No: 1” CART/STR100

Applications:

Inline strainer - protect pumps, Small kerbside pumps - protects pumps & mobile trailers


Submit an Enquiry








 
Aereon
Alma
Brodie
Emco-Wheaton
Equiptank
Flare
Flotech
Hi-G-Tek
Icermax Logo
Jordan
Klaw
Perolo
Saferack
Tim-Elektronik
Todo
Toptech
Posiwell
Trelleborg
VR Refiner

Copyright © 2018 Soliflo. All Rights Reserved. Group Companies: • Soliflo